OEC handles a synthetic oil for your compressor, vacuum pump, pressure washer pump, and more.


The correct viscosity grade AMSOIL synthetic compressor oil is recommended for use in single and multistage rotary screw, rotary vane, reciprocating, and other compressor applications.  These oils are compatible with PAO, ester-based, and petroleum-based compressor oils but are not compatible with glycol-based or silicone-based compressor oils.  For glycol-based synthetic oil, see SIROCCO below.

- Incorporates the highest quality, thermally stable PAO synthetics.
- Fortified with premium non-detergent additives for maximum protection at high temperatures.
- Lasts up to 8,000 hours reducing maintenance and waste oil disposal costs.
- Low friction properties, resists viscosity increase from oxidation, and improves operating efficiency.
- Contains anti-foam additives and is anti-wear fortified.
- Hydrolytically stable to resist acid formation.
- Readily separates from water.  Water can be easily drained for increased oil life.
- Antioxidant additives resist varnish and carbon formation.
- Ashless, high-flash-point formula with very low carbon-forming tendencies minimizes the incidence of ignition-promoting “hot spots.”

Other applications include: vacuum pumps, pressure washer pumps, and other applications such as gears, bearings, blowers, pumps, and handheld pneumatic tools.

Monitoring by oil analysis is recommended.

NOTE: Not recommended for "breathing air" or refrigeration compressors.  Not recommended for use with polycarbonate plastic that is not metal covered, PVC plastic and butyl, ethylene-propylene, or SBR rubber.

Synthetic Compressor Oil is available in the following viscosities:
ISO 32, SAE 10W     ISO 46, SAE 20     ISO 68, SAE 30     ISO 100, SAE 30/40

Recommended as a direct replacement for PAG compressor oils such as Sullair Sullube 32 and Ingersol-Rand SSR Ultra Coolant. Not recommended for use with Silicone base fluids.

- Formulated with premium synthetic ester technology.
- Lasts several times longer in use than mineral-based oils (up to 8,000+ total hours).
- Fully formulated with non-detergent additives.
- Protects against wear, oxidation, foam, and rust.
- Low pour point, high viscosity index, and lack of paraffins (wax) make it an excellent all-season lubricant.
- Repels water to prevent damaging oil/water emulsions, allowing for longer lubricant life and ease of water removal from the sump.
- Compatible with polyglycol fluids.
- Ashless additive system and resistance to carbon formation minimize deposits and ignition-promoting hot spots.

May be used in applications calling for either an ISO-32 or ISO-46 compressor oil or coolant.  Recommended for use in single- and multistage rotary screw compressors and vacuum pumps.

Monitoring by oil analysis every 1,000 hours is recommended.

Click here for more information.
Oler Equipment Care - Tulsa, Oklahoma